DS-K1106 series card reader is a kind of high-performance product, with a 32 bit high-speed processor. It communicates with access controller via either RS-485 protocol or Wiegand protocol. And a build-in tamper-proof module helps to protect card reader from malicious damage. As to the physical appearance, the PC+ABS material makes water proof and dust proof possible in poor environment


-32-bit high-speed processor
-Support RS485 and Wiegand (w26, w34) protocol
-A group of LED indicator (blue , green, and red) for displaying power, communication, and card reading status
-Build-in buzzer for status indication.
-Supports Mifare card reading, including card No.or content reading
-Tamper-proof function
-Accurate data and time display provided by built-in electronic clock
-ISP function for online upgrade (only supported by RS-485 communication device)
-Watchdog program to ensure the basic function of the terminal


System Parameters

Card Reading Frequency: 13.56MHz
ID Settings: Setting by the DIP Switch on the Main Board
Card Type: M1 Card
Processor: 32-bit

Device Interfaces

Communication Mode: RS485/Wiegand( Set via DIP Switch)
Reading Range: ≤50mm (≤1.97″)


Radio Frequency Standard: ISO 14443-A
Power Supply: 12VDC
Prompt: Buzzer
Power Consumption: ≤2W
LED Indicator: Power/Status
Protection Level: Indoor
Installation: Wall Mounting with Gang Box
Temper-Proof: Support
Working Humidity: 10% to 90% (Non-Condensing)
Working Temperature : -20°C to +65°C (-4°F to +149°F)
Dimensions (L×W×H): 85.6mm x 86.5mm x 14mm (3.37″×3.41″×0.55″)