DS-K1107E DS-K1107EK EM Card Reader
DS-K1107M DS-K1107MK Mifare Card Reader


-Equipped with the 32-bit high-speed processor
-RS-485 and Wiegand (W26/W34) protocol
-Build-in EM card reading module (Frequency:125KHz). Supports reading ID card No. (DS-K1107E/DS-K1107EK)
-Build-in Mifare card reading module (Frequency: 13.56MHz). Meets the standard of ISO 14443-A. Supports reading Mifare card No (DS-K1107M/DS-K1107MK)
-Supports tampering alarm
-Built-in buzzer for identifying the reading status
-Online upgrade function
-Watchdog design for repairing itself in case that exception occurs, to ensure the long service life of the reader


System Parameters

Card Reading Distance: EM Card: ≤100 mm (≤3.94″) Mifare Card:≤50 mm (≤1.97″)
ID Settings: Setting by the DIP Switch on the Main Board
Processor: 32-bit


Key Board: No Keypad (DS-K1107E and DS-K1107M),Keypad with 12 Keys (0~9, *, #) (DS-K1107EK and DS-K1107MK)
Audio Alert: Beeper
Power Supply: 12VDC
Communication Interface: RS-485 / Wiegand (DIP Switch)
Power Consumption: ≤2W
LED Indicator: Power Indicator; Status LED Indicator
Protection Level: IP 65 Water-Proof
Installation: Wall mounting with screws. The Gang Box is not supported.
Temper-Proof: Support
Working Humidity: 10% to 90% (Non-Condensing)
Working Temperature : -20°C to +65°C (-4°F to +149°F)
Dimensions (L×W×H): 115mm × 44mm × 22mm (4.53”×1.73”×0.87”)